Devia Gahana Cindi Alfian, Dicky Januarizky Silitonga, Muhammad Al Fajri Ramadhan, Ihsan Naufal Ridhwan, Rionaldi Prasetyo Utomo, I. Made Rudiarta
The advancement of digital technology in the age of Industrial Revolution 4.0 has driven other engineering sectors to keep up with the progressive demand for high-performance computing and electronics. Thermal management plays a critical role in maintaining the performance of electronic devices by keeping the system temperature at an optimal level and preventing overheating. A heat dissipation device widely employed in computing and other electronic systems’ heat management is a fin-type heat sink, owing to its robust and simple design. In this work, the authors evaluated heat sinks of different pin-fin cross-sectional geometry, arranged in a staggered configuration, in terms of heat transfer characteristics under forced convection. Three basic geometries were chosen on the grounds of manufacturing easiness and market availability: circular, square, and hexagonal. All the tested geometries had approximately the same hydraulic diameter. Therefore, the results could be compared to each other. The investigation revealed that the square cross-section induced an excellent convection coefficient, hence higher heat dissipation, compared to the counterparts. The tradeoff between heat transfer performance and size-related parameters, such as surface area and material volume, is also discussed in this paper. This is an open access article under the CC BY-NC-SA 4.0 license.
Department of Mechanical Engineering, Faculty of Industrial Technology, Institut Teknologi Sumatera, South Lampung, 35365, Indonesia