Comparing the properties of cellulose nanofibrils from wood and bark of Norway spruce (Picea abies KARST.) and silver poplar (Populus alba L.)

Open

Didik Supriyadi, Sabine Bodner, Jozef Keckes, Wolfgang Gindl-Altmutter, Stefan Veigel

2024 Carbohydrate Polymer Technologies and Applications Vol. 7 Article Cited by 11 SDG 15SDG 17 Quartile

Abstract

Bark, an underutilized biomass resource, is a promising raw material for cellulose nanofibrils (CNF) production due to its renewability, abundance, and low cost. Because data on the physical and chemical properties of bark-based CNF is scarce, we investigated the feasibility of CNF production from two different bark species (Norway spruce and silver poplar) using a combination of sequential extraction, delignification, and mechanical fibrillation. The chemical composition, crystallinity index, morphology, fibril diameter, thermal stability, and mechanical properties of the CNF were evaluated and compared with those of wood-based CNF from the same species. The results showed that spruce bark yielded CNF virtually undistinguishable from spruce wood-derived CNF in terms of structure and mechanical properties of nanopapers made thereof. Nanopapers prepared from spruce wood and bark showed comparable tensile strength and Young's modulus of around 130 MPa and 15 GPa, respectively. Contrarily, CNF derived from poplar bark were different in structure compared to poplar wood CNF, and nanopapers produced from poplar bark CNF showed only modest mechanical performance. In summary, the extensive characterization carried out demonstrated the general feasibility of CNF production from tree bark but also revealed the need for further optimization, like in the case of poplar bark. © 2024 The Author(s)

Affiliations

Department of Material Sciences and Process Engineering, BOKU-University of Natural Resources and Life Sciences Vienna, Konrad-Lorenz-Straße 24, Tulln, 3430, Austria; Department of Chemical Engineering, Institut Teknologi Sumatera, Jl. Terusan Ryacudu, Way Huwi, Kec. Jati Agung, Lampung Selatan, 35365, Indonesia; Chair of Materials Physics, Montanuniversität Leoben, Jahnstraße 12, Leoben, 8700, Austria

Research at a Glance

Premium content — register to unlock

Research at a Glance

Register to unlock

Topics & SDG Alignment

Premium content — register to unlock

Topics & SDG Alignment

Register to unlock

Collaboration

Premium content — register to unlock

Collaboration

Register to unlock

Author Profile (Selected)

Premium content — register to unlock

Author Profile (Selected)

Register to unlock

References Overview

Premium content — register to unlock

References Overview

Register to unlock

Journal & Source

Premium content — register to unlock

Journal & Source

Register to unlock

Metadata & Integrity

Premium content — register to unlock

Metadata & Integrity

Register to unlock