Preparation of Oil Palm Leaves Ash-Supported Titania for the Elimination of Safranin-O Dye in Water

Open

S. Salprima Yudha, Morina Adfa, Swadexi Istiqphara, Aswin Falahudin, Muhamad Alvin Reagen

2024 Molekul Vol. 19 Issue 2 Article Cited by 1 SDG 12SDG 15SDG 17 Quartile

Abstract

The objective of this study was to develop an approach for incorporating titanium oxide or titania into oil palm leaves ash (OPLA) using a simple procedure. The study process comprised the mixing of oil palm leaves (OPL) powder and titanium tetraisopropoxide in chloroform solvent, followed by the elimination of the solvent to obtain a solid residue. Subsequently, the residue obtained was calcined at 500 °C for 5 hours, leading to the production of a yellow-light powder. The results of product characterization using X-ray diffraction (XRD) and scanning electron microscopy analysis showed the presence of titanium oxide in OPLA. In addition, the wide diffractogram detected in XRD analysis revealed the presence of a silica peak. The un-sharp peaks in the regions of 25.6°, 38.2°, 47.9°, 54.5°, and 62.9° showed that the TiO2 particles were pure anatase, and no peaks of other TiO2-anatase phases were detected. Analysis using SEM showed that the surface of the material obtained was irregular and tended to have a hollow shape, while energy dispersive X-ray analysis revealed a SiO2 content of approximately 73%. However, the titanium element or titania was not detected possibly due to its small concentration. The material obtained also had a good catalytic activity for safranin-O dye elimination under sunlight irradiation, which served as the activation energy source. Based on these findings, the use of OPLA (a side product of oil palm plantations) could be evaluated economically due to its effective role in the catalytic process despite the addition of a small amount of titania catalyst. © 2024, Universitas Jenderal Soedirman. All rights reserved.

Affiliations

Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Bengkulu, Kandang Limun, Kota Bengkulu, 38122, Indonesia; Research Center of Sumatra Natural Products and Functional Materials (RC-SuNaPFuMa), Universitas Bengkulu, Kandang Limun, Kota Bengkulu, 38122, Indonesia; Department of Electrical Engineering, Institut Teknologi Sumatera (ITERA), Way Huwi, Kecamatan Jati Agung, Kabupaten Lampung Selatan, Province of Lampung, Indonesia

Research at a Glance

Premium content — register to unlock

Research at a Glance

Register to unlock

Topics & SDG Alignment

Premium content — register to unlock

Topics & SDG Alignment

Register to unlock

Collaboration

Premium content — register to unlock

Collaboration

Register to unlock

Author Profile (Selected)

Premium content — register to unlock

Author Profile (Selected)

Register to unlock

References Overview

Premium content — register to unlock

References Overview

Register to unlock

Journal & Source

Premium content — register to unlock

Journal & Source

Register to unlock

Metadata & Integrity

Premium content — register to unlock

Metadata & Integrity

Register to unlock