Riris Sukowati, Yadi Mulyadi Rohman, Bertolomeus Haryanto Agung, Aan Priyanto, Dian Ahmad Hapidin, Khairurrijal Khairurrijal
The detection of hazardous vapors is crucial for controlling their pollution in the environment. The Quartz crystal microbalance (QCM) stands out as a high-performance sensing device that features high sensitivity, simplicity, low cost, and the ability to operate at room temperature. In this study, a QCM has been coated with a new active layer of PVP/NiAc composite nanofibers to detect hazardous vapor. The QCM surface is coated with PVP/NiAC nanofiber which is fabricated using the electrospinning method. The morphology and average diameter of PVP/NiAc composite nanofibers were investigated utilizing an optical microscope and ImageJ software, respectively. The developed composite nanofibers have an average diameter of 989 ± 172.61 nm. The fabricated sensor was tested against methanol, acetone, dimethylacetamide (DMAc), and formaldehyde vapors in different concentrations ranging from 5.0 to 22.5 ppm. The sensitivities of QCM sensors with PVP/NiAc nanofiber active layer were 2.35, 0.62, 0.32, and 0.29 Hz/ppm for methanol, formaldehyde, acetone, and DMAc, respectively. The developed sensor performed the highest sensitivity and frequency shift response in detecting methanol vapors. Furthermore, the adsorption phenomena were investigated by adapting several adsorption models, including Scatchard, Freundlich, Langmuir, and Langmuir–Freundlich, to validate the physical adsorption affinity. In conclusion, the QCM sensors based on PVP/NiAc composite nanofibers can be a considerable way to detect hazardous vapors, especially methanol, in various sensing applications. © 2025 American Institute of Physics Inc.. All rights reserved.
Department of Physics, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung, Jalan Ganesa 10, Bandung, 40132, Indonesia; Department of Physic, Faculty of Science, Sumatera Insitute of Technology, Jalan Terusan Ryacudu, Way Huwi, Lampung, 35365, Indonesia