Muhammad Zainuddin Lubis, Budiana, Oktavianto Gustin, Widya Rika Puspita, Amandangi Wahyuning Hastuti, Satria Antoni, Insaniah Rahimah, Husnul Kausarian, Budhi Agung Prasetyo
Land areas in the territorial waters will often be affected by sea-level flooding or commonly referred to as rob. This research was conducted to see the physical condition of the waters and to do a hydrodynamic model (2D) in the waters of the Tembesi Reservoir, Batam, Indonesia. This research was conducted using primary and secondary data to produce physical conditions of waters and hydrodynamic (2D) models. The results showed the depth of waters has a minimum value of depth of -1.05 meters and a maximum value of depth of -5.95 meters. The percentage of wind speed below 1 Knot is 3.23%, and the independent variable in the percentage of wind data processing is 1.61%, with the lowest wind speed in the range of 0.1-1 Knots. Water level models produced in conditions during the filling process before the water discharge from the outlet is 0.023 meters and relatively small currents range from 0.0012 cm/s. Elevation of the final water level to the final flow when the conditions during the filling process before the water is discharged, resulting in highest water elevation, compared to when the water condition in the reservoir has been discharged from the outlet into the sea. © 2020 IEEE.
Politeknik Negeri Batam, Geomatics Engineering, Batam, Indonesia; Electrical Engineering, Politeknik Negeri Batam, Batam, Indonesia; Yamaguchi University, Graduate School of Sciences and Technology for Innovation, Ube City, Japan; King Abdulaziz University, Marine Geology, Jeddah, Saudi Arabia; Matauli College of Fisheries and Marine, Socio-economic Fishery, Sibolga, Indonesia; Universitas Islam Riau, Department of Geology Engineering, Riau, Indonesia; Institut Teknologi Sumatera, Marine Environmental Science, Lampung, Indonesia
Research at a Glance
Register to unlock
Topics & SDG Alignment
Register to unlock
Collaboration
Register to unlock
Author Profile (Selected)
Register to unlock
References Overview
Register to unlock
Journal & Source
Register to unlock
Metadata & Integrity
Register to unlock