Mutiara Fajar, Emenda Sembiring, Marisa Handajani
Microplastics (MP) can pose a serious threat to the environment and human health because of their tiny size and ability to spread easily in water. One of the alternative treatments to remove MP from water is the rapid sand filter (RSF). The objective of this study was to analyze the effects of filter media size and loading rate on RSF performance in removing MP. The applied filter media was silica sand with effective sizes (ES) of 0.39 and 0.68 mm. The loading rates of filtration were 4; 6; 8 and 10 m3/m2-h. The MP samples were made from plastic bags and torn tires (artificial samples: 10 to 800 µm). This study showed that the MP removal percentage was up to 96.6% (MP size larger than 200 µm). The head loss increment for loading rates 4; 6; 8; 10 m3 /m2-h was 0.16; 0.35; 0.34; 0.25 m (ES 0.39 m) and 0.10; 0.18; 0.18; 0.19 m (ES 0.68 m)), respectively. Meanwhile, the filtration cycle for loading rates 4; 6; 8; and 10 m3/m2-h was 5, 2, 2, and 1 days (ES 0.39 mm) and 9, 4, 3, and 3 days (ES 0.68 mm), respectively. The result of this study showed that the smaller the filter media size, the higher the head loss of the filter media bed. Furthermore, there is an increased head loss of the filter media bed when the loading rate is greater. © 2022 Published by ITB Institute for Research and Community Services,.
Environmental Engineering Study Program, Faculty of Civil and Environmental Engineering, Institut Teknologi Bandung, Jalan Ganesha No. 10, Bandung, 40132, Indonesia; Environmental Engineering Department, Institut Teknologi Sumatera, Jalan Terusan Ryacudu, Way Huwi, Kec. Jati Agung, South Lampung, 35365, Indonesia
Research at a Glance
Register to unlock
Topics & SDG Alignment
Register to unlock
Collaboration
Register to unlock
Author Profile (Selected)
Register to unlock
References Overview
Register to unlock
Journal & Source
Register to unlock
Metadata & Integrity
Register to unlock